Description
LDPE Injection Grade
Tests | Value | Unit |
Melt Flow Rate (MFR) | 15 | g/10min |
Density | 0.922 | g/cm3 |
Tensile Yield Strength | 7 | Mpa |
Elongation at Break | 75 | % |
Wien Softening Point | 85 | °C |
Packing | In 25 kg PP woven bags,20MT/20’FCL |
LDPE film grade
Tests | Value | Unit |
Melt Flow Rate (MFR) | 2 | g/10min |
Density | 0.9225 | g/cm3 |
Tensile Strength | 9 | Mpa |
Elongation at Break | 500 | % |
Fish eye max(0.3-2mm) | 30 | n/1200cm2 |
Stripes | 20 | cm/20m3 |
Packing | In 25 kg PP woven bags,20MT/20’FCL |
Application:
Packing film, net, cord; General purpose and industrial purpose, bottle, box; Agricultural irrigation pipe, hot water pipe;
Greenhouse film goods bag; Burrier drainage pipe; PE pipe; For agricultural film, shrinkable film; all kinds of packaging bag;
Injection molding, cast film; etc.
Film Grade HDPE
Property | Unit | Typical Value |
Mass density | g/cm 3 | 0.941-0.959 |
Melt flow Rate(190 centidegree /2.16kg) | g/10min | ≤1.0 |
Tensile yield strength | MPa | ≥19.0 |
Flexural modulus | Mpa | ≥965 |
Elongation@ break | % | ≥400 |
Impact Embrittlement temperature | centidegree | MAX -118 |
Dielectric Constant | 100KHZ | 2.32 |
| 1MHZ | 2.31 |
Loss Tangent | 100KHZ | MAX 0.0001 |
| 1MHZ | MAX 0.0001 |
Volume resistivity | OHM-CM | MIN 1x10 15 |
Application | Mainly used for the production of shopping bag, food bags, etc. |